Way Past 40.

Way Past 40.

What's it about?

Just a load of old rambling about me and the different things I end up doing...normally projects and builds of some description!

I have also published a book called "The Project Has Landed..." about the Land Rover Series 3 rebuild I did and it can be bought from any amazon website so please feel free to go and get yourself a copy!

If you feel the need or just want to talk feel free to contact me via Nick@nickysmith.me and I will get back to you asap :)

Thanks for reading.

Humpty Dumpty Day.

The 110Posted by Nicky Smith Tue, March 14, 2017 21:16:18
I get up really early in the morning for work which in itself is ok. I like to see the start of each new fresh day before most folks have even stirred in their beds dreading the alarm clock and after sneaking a quick peak at the clock dropping back off for a few more snug minutes of sleep.
The problem is when I take a holiday. My body does not seem to want to just relax into the warm sheets of my bed in the morning. Nope, it prefers to just keep the normal routine going regardless and as such I found myself reaching the bottom of a cup of in bed well before 7am this morning.

Wifey had already left for work so unable to steep in my own bed warmth anymore I decided to have a poke around The 110 to see what I could up to with it today.
There has been a job I seemed to be pushing back (insert running away from there) for some reason each time I thought about it. This was making up some exhaust mount brackets.
I don't know why I was so averse to getting this particular chore done but seeing as I had put it off at least half a dozen times I figured that today was the day.

There were only three mounts in all to fabricate up so off into the garage to the old chocolate tin pile I went. There are probably for or five large chocolate tins in there, the type you get at Christmas that the contents seem to disappear from incredibly quickly. This odd effect is usually accompanied by a sick in your stomach feeling due to a large sugar rush. By the time they hit my garage they are bone dry and what tends to happen is any part, nut, bolt, metal, brace, bracket and something small and potentially useful end up being chucked in them.
This is a god send in such situations as having to make up three exhaust brackets from scratch!
A good rummage later had me with enough bots on the workbench to make a start. With some whacking, bending and cutting I soon, about three hours later, had the brackets made up and fitted. Not too bad really as they were all made from stuff other folks would just chuck away!



It's so nice to have the exhaust actually sitting where it is supposed to be! SImple things eh.
With that done followed swiftly by a cheese on toast sort of lunch I decided that I may as well start putting the odds and sods back into place on the old boy.

I fettled the rear number plate back into position.


Then seeing as funds are very tight at the moment I cleaned up the headlight surrounds and an old grill that was in the shed using some WD40.




I will be replacing these with new items in the future but at the moment they will have to do.
Upon closer inspection it turns out that most of the light lenses are cracked or damaged so I need to source a second hand set of these along with another Discovery 1 power steering box. Going to have to be later in the month though as funds are ridiculously tight at the moment.

A quick lick of paint on the bonnet wheel brace along with a cheeky coat on the light bar and it was time to call it a day. Then I had a quick scramble in the parts shed to see if I had a horn because I had forgotten all about that! Turns out I had on old Disco one in there which when tested on a car battery let off a convincing noise load enough to pass an MOT. That'll do nicely then and should get fitted tomorrow....

www.nickysmith.me


  • Comments(0)

Fill in only if you are not real





The following XHTML tags are allowed: <b>, <br/>, <em>, <i>, <strong>, <u>. CSS styles and Javascript are not permitted.