Way Past 40.

Way Past 40.

What's it about?

Just a load of old rambling about me and the different things I end up doing...normally projects and builds of some description!

I have also published a book called "The Project Has Landed..." about the Land Rover Series 3 rebuild I did and it can be bought from any amazon website so please feel free to go and get yourself a copy!

If you feel the need or just want to talk feel free to contact me via Nick@nickysmith.me and I will get back to you asap :)

Thanks for reading.

Tough Day. Lots Done.

The 110Posted by Nicky Smith Wed, March 15, 2017 20:05:26
Once again I found myself sat in bed looking at the bottom of a brew thinking about The 110.
I had to go and buy some nuts and bolts for the brake back plates and seeing as it was such a nice clear blue sky sort of day I decided to take the motorbike out for a spin to Paddocks. So at 7:45am I found myself cruising into the Derbyshire countryside, there are far far worse places to be in the sunshine.
The rolling green hills past me by along with the all of the signs of spring arriving. The daffodils are everywhere and the trees waking up in bud once again, it will only be a matter of a few weeks before we find ourselves sat in warmer weather and the heating turned off.

Since the bike crash I have to admit I seem to have become a bit pants on two wheels. I still enjoy it but my gear changes seem to be all over the shop and don't get me started on my road positioning. The little Bandit needs to come out a bit more often I think so I can get my eye back in once again.
Surprisingly there was not a queue at Paddocks and I was in and out in under five minutes...this has to be some sort of record surely! A quick hop back onto the trusty stead and I was headlong back into a different route home enjoying the sunshine and dry roads.

All too soon I was back home and ready to get cracking with sorting out the back brakes on the Land Rover. I didn't want to do it I have to admit here and I very nearly walked away but something said to just get stuck in.

Wheel off then armed with a large hammer the drum soon submitted into rusty cooperation falling off onto the floor with an almighty clang!
That was the neighbours up then whether they wanted to be or not.
As I looked up into what was exposed the amount of dirt and muck in there was astounding! There was also some sort of unidentifiable slime that I did not want to be playing with for too long so an old rag was brought into to play then promptly dumped into the wheelie bin.


The hub was next which came off with no issues on this side unlike the other side which snapped a bolt in it. That took some serious heating up to remove I can tell you, I thought it was going to be a drill and retap affair but it seems the Landy Gods were looking upon me favourably today. They must have been pleased to see the sunshine as well.


Brake pads then the caliper were soon stripped out, even the brake pipe came off of both sides without snapping! That seems to be just about unheard of to me but why look a gift horse in the mouth eh. The back plate fell off in a rusty heap after a bit of a gentle tap with a 4lb lump hammer and I was left with nothing but the stub axle in situ.


Time to put all of the new shiny bits on then.
The back plate along with the pre-fitted new caliper, I mean why struggle once the plate is fitted? May as well sort it out before hand to get the dripping brake pipe back into place asap.


Now it was time to battle with the brake pads and new springs. The ends of teh springs needed a small grind down as they were far too long on the hook end but soon found themselves sitting where they should have been. You may notice in the pictures that there is a set of pads laid out under the The 110 exactly as they came off of the old back plate. I do this to make sure I don't end up fitting the pads upside down or in the opposite way they should be. Helps to remember which holes the springs fit into as well.
Looks great with shiny new bits on though :)


Making sure the pads were sitting in the right place I fitted the nice new brake drums too, be rude to scrimp at the very end wouldn't it. In all honestly I figured that if I had to do this job I may as well do it right. The I also fitted all new bearings and seals onto the hub before refitting, who knows how old the the ones that were in them were.


So there you have it the back brakes are done. I didn't want to do them and they took all day but I am really glad I have got them out of the way.

The only stop I had really was for lunch. My neighbour popped around so I figured we may as well ave an egg and bacon cob with our brews. As we chatted away the conversation came around to the subject of scrapyards and how we miss them.
We are both old enough to remember hunting around acres of rusty steel looking for the model of car we wanted then rummaging through it hoping the one part that we wanted was still fitted to it.
And lugging your heavy toolbox around the place. Then carrying that along with all of the extra parts you had removed "Just in case" you needed them when you were fitting the part you actually had to do.
We came to the conclusion that we missed scrapyards. Many a happy hour were spent looking for that extra bit of gold in the motor you were happy to hunt through.
It's a shame that most scrappies these days have already removed the parts and put them onto a shelf. Yes it is easier and quicker, less tiring, less work, cheaper, cleaner, warmer and generally less hassle but I did enjoy the hunt...


nickysmith.me




  • Comments(0)

Fill in only if you are not real





The following XHTML tags are allowed: <b>, <br/>, <em>, <i>, <strong>, <u>. CSS styles and Javascript are not permitted.